The main features

Effectively block ultraviolet radiation

Uv solvents are added to the bottom. the window reflective film can block 99% of ultraviolet rays and reduce the motherland and aging of indoor furniture. the surface is anti-scratch and has friction resistance. it will not cause mother or bubbling. it is easy to remove, economical and practical.

Thermal insulation and energy saving

The heat control window film can retain heat in winter, block it outside in summer, help reduce expensive energy costs.

Privacy protection

The one-way mirror window film only provides good privacy during the day; at night, the effect of the mirror will be reversed, because the interior will be exposed to more light than the outside.The side with the maximum light will have a mirror effect.

Use new glue

This for home dyeing window film will not stick after being soaked in water and is easier to install than a glue film; after the water becomes, the viscosity will recover and become stronger.Remember to moisten the bonding surface and window surface with a large amount of soapy water

Easy to install and remove

No adhesive required, stick with static adhesive, just apply with plenty of soapy water.No need to worry about damage or residue when disassembling.Operation tutorial

★The window film is in the construction of indoor surfaces! the window film is very brittle, be careful not to damage it.

★The window film is divided into two layers: the viscosity is the positive film, and the non-stick one is the protective film.

★Spray bubble water evenly on glass and window film throughout the process (important)!

Step 1: prepare tools and water

Tools required: scraper, spray bottle, knife, towel.Bubble water: prepared with tap water and shower gel (500ml water and 10 drops).The entire membrane is made with this kind of bubble water.

Step 2: shear window film

Use a tape measure to measure the net size of the glass and zoom in on approximately 1- 4cm to remove the window film (personalized guests are not suitable for this step).

Step 3: clean the glass

Spray wine bubble water on the glass surface, scrape the glass 1-2 times with a scraper from left to right without missing scratches), and wipe the corners of the glass with a towel.